ECET 105
This Tutorial was purchased 4 times & rated No rating by student like you.
1. Does a typical computer have any analog outputs? If so, what are they?
2. List three advantages of digital signal representation as compared to their analog representation.
3. Convert 126 x 10+2 to scientific and engineering notations.
4. Make the following conversions:
a.&n.....

This Tutorial was purchased 3 times & rated A+ by student like you.
I. OBJECTIVES
1. To learn the function and basic operation of the instruments comprising a test bench
2. To gain a basic understanding of how to .....

This Tutorial was purchased 1 times & rated No rating by student like you.
1. What is the duty cycle for a square wave signal that is HIGH for 15 nsec and LOW for 30 nsec?
2. A pulse train is shown on the oscilloscope below. Determine the period of the pulse.
3. Determine the frequency for a pulse that occurs every 10 ms.
4. What is the base10 val.....

This Tutorial was purchased 1 times & rated A by student like you.
I. OBJECTIVES
1. To learn the basics of soldering.
2. To produce mechanically and electrically sound solder joints.
3. To assemble the Electronic Die Kit.
II. PARTS LIST
Equipme.....

This Tutorial was purchased 3 times & rated A+ by student like you.
1. Determine the output X for the 2input AND gate with the input waveforms shown.
2. Determine the output X for the 2input OR gate with the input waveforms shown.
3. Determine the output X for the 2input ExclusiveOR gate with the input waveforms shown
4. Determine the output .....

This Tutorial was purchased 3 times & rated No rating by student like you.
I. OBJECTIVES
To understand basic logic functions (AND, OR, and NOT) and their complement used in Boolean algebra and digital logic design.
To test simple logic smallscale integration (SSI) integrated circuit (IC) devices.
II. &n.....

This Tutorial was purchased 0 times & rated No rating by student like you.
1. Draw a logic circuit that performs the following Boolean expression:
2. Determine the Boolean expression for the circuit shown below.
3. The Boolean expression for an AND gate is . Does the expression also describe an AND gate? Prove your answer.
4. Write the Boolean expression for.....

This Tutorial was purchased 1 times & rated A+ by student like you.
Objectives:
To design a digital logic circuit using a truth table and sumofproduct (SOP) formulation.
To use the MultiSim program to simplify, simulate, and test the circuit operation.
To build and test the logic circuit to verify that the system performs as expected.
.....

This Tutorial was purchased 2 times & rated A by student like you.
1. Determine the decimal value of each of the following unsigned binary numbers:
2. Determine the decimal value of each of the following signed binary numbers displayed in the 2’s complement form:
3. Determine the outputs (Cout, Sout) of a fulladder for each of the following in.....

This Tutorial was purchased 3 times & rated A+ by student like you.
Objectives:
The objectives are to reinforce the concepts of binary addition/subtraction while using the Quartus II Programmable Logic Tool as well as getting used to the program. We were also supposed to build and test a simple adder/subtractor using the eSOC III Board.
Observ.....

This Tutorial was purchased 0 times & rated No rating by student like you.
1. When a HIGH is on the output of the decoding circuit below, what is the binary code appearing on the inputs?
2. Write the Boolean equations for each of the following codes if an activeLOW decoder output is required. The first decode is shown as an example.
3. What are the ac.....

This Tutorial was purchased 1 times & rated A+ by student like you.
Objectives:
To learn about the operation of a BCDtosevensegment decoder
To learn about the operation of a sevensegment display
To learn about the operation of multiplexers
To build and test a multiplexed display circuit using both discrete components and the eSOC III.....

This Tutorial was purchased 2 times & rated A by student like you.
1. Sketch the Q output for the waveforms shown. Assume that Q starts LOW.
2. Sketch the Q output for the circuit shown below. Assume that Q starts LOW.
3. Sketch the Q output for the circuit shown below. Assume that Q starts LOW.
4. Sketch the Q output for the circuit shown below. Ass.....

This Tutorial was purchased 3 times & rated B+ by student like you.
I. OBJECTIVES
To test the operation of a 74LS74 D flipflop and compare the operation with the predicted behavior
To test the operation of a 74LS112 JK flipflop and compare the operation with the predicted behavior
To measure propag.....
